The working principle, the Bronze Flanged Ball Valve application characteristics, structure design and the advantages and performance

Definition.

Meet the environmental conditions, is used to control the fluid pressure within the pipe, the flow rate and the flow direction of the equipment.

Bronze Flanged Ball Valve

Product advantage:

Application conditions: ship piping system: such as fuel, water, steam, cooling, engine etc.. Chemical piping system: such as vessel, heat exchanger, mixer, liquid, drying, reaction. Petrochemical Pipeline System: such as oil gas mining, crude oil extraction, oil refining, transportation, Bronze Flanged Ball Valve. Abstract: the pipeline system of antibiotic fermentation, concentration, vegetable oil, asphalt, renewable energy etc..

The whole material using nickel aluminum bronze. Has the advantages of good strength, good wear resistance, good corrosion resistance and high temperature oxidation resistance and so on, are widely used in the shipbuilding industry, chemical industry, petrochemical industry, refining engineering industry in the pipeline, especially suitable for oxygen, freshwater and seawater medium pipeline. = bronze flanged ball valve = mainly as fluid medium control pipe main pipe and standby pipeline system, and regulate the use of cut-off, switched on.

Advantage.

Compact structure, reliable sealing, small fluid resistance, simple structure, convenient repair, sealing surface and spherical often in the closed state, can not easily be medium erosion, easy to operate.

The main characteristics of bronze flanged ball valve:

1 design structure: floating type, fixed type,

2 standard connection: thread diameter (DN15~50), mm (DN200~ mm DN500),

3: the temperature range of 0 ℃ ~120 ℃,

Pressure range: 4 GB (0.6Mpa ≤ 6.4Mpa), American Standard (150LB~800LB),

The 5 seal material selection: Bronze Ball valve screw end, sea water, oil, gas, dust and other media. The economic rational sealing material selection: ptfe.

Installation and maintenance

1, hand wheel, lever operated valves can be installed on any position of the pipeline.

2, the hand wheel, handle and Wai actuator, does not allow for the use of lifting.

3, the flow of media should be consistent with the direction of the arrow shown.

http://www.gmkvalve.com