• English
  • français
  • español
  • português
  • русский
  • العربية
  • Deutsch
  • Indonesia
  • 日本語
  • Việt Nam
  • italiano

Your Location : Home » PRODUCTS » Plug Valve » Orbit Plug Valve

Orbit Plug Valve

Product name:Orbit Plug Valve



Material:WCB, LCB,LCC, WC6,WC9, C5,C12,C12A, CF8, CF8M, CF3, CF3M ect


Operate:Handwheel, Wormgear, Penumatic Actuator, Electric Actuator, Hydraulic Actuator


cheap Orbit Plug Valve



1.The product has reasonable structure, reliable sealing,excellent performance and beautiful appearance.

2.Its sealing realized by the sealing rings around the valve disc.It has unique protection of wwallow-tailed sink and fixed sealing rings.

3.Its characteristic double-direction fliow makes installation and use more convenient.

4.The materials of the parts and sizes of flanges can be reasonably configured according the actual operation condition or the requirements of the customers,so as meet the various needs of engineering

5.When the valve is fully opened, the channel of plug is in alignment with the channel of valve body,which can ensure ideal and lowest dercrease on pressure.

Wcen the hand wheel is turned,the plug will rotate toward the closing direction,and at the same time draft the rotation of valve disc by 90 degree;when the hand wheel is turned further on,the plug will be pressed down,and make the valve disc open to two sides,so that the valve disc will be in firm contact with the valve seat and close the valve.When the hand wheel is turned inversely,first of all the plug will move upward,and the valve disc and valve seat will be separated;if the hand wheel is turned further on ,till the valve dics is truned by 90 degree driven by the plug,and finally the channel of plug will be in alignment with the channel of valve body,so that the valve is be fully opened.The advantage of this type of valve is,during the opening and closing of valve,the valve disc and valve seat is separated,and there is no friction and thus sealing face is no abrasion in the process;at the same time,soft seal is applied for selling,so that there will be no leakage in the process of closing.


Design and Manufacture:API599,API6D

Pressure-temperature rating: ASME B16.34

Face to face(end to end):ANSIB16.10

End Connection: 2"-24" ASME B16.5; 26" -42" ASME B16.47; B.W end ASME B16.25

Test and inspection:API598

If you have any questions, please send an e-mail inquiry

  • * Products Name :
  • * E-mail :
  • * Name :
  • * Telephone :
  • * Message :
  • * Verifycode :